帮译一句硬盘上的英文Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/04 11:02:03
帮译一句硬盘上的英文Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)

帮译一句硬盘上的英文Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)
帮译一句硬盘上的英文
Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)

帮译一句硬盘上的英文Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)
跳线,从盘,主盘或者单个驱动器,允许电缆选择,主盘非ATA兼容从盘,限制驱动器容量到2.1G(4092柱面)

Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)
跳线,从跳线位,主跳线位或是单独的驱动,使可以用电缆选择,主跳线位上非ATI兼容的从跳线位,将驱...

全部展开

Jumpers ,Slave,Master or single drive ,Enable cable select,Msater with non-ATA compatible slave ,Limit drive capacity to 2.1 Gbytes(4092 cylinders)
跳线,从跳线位,主跳线位或是单独的驱动,使可以用电缆选择,主跳线位上非ATI兼容的从跳线位,将驱动空间限定在2.1Gbytes(4092 cylinders)
基本上是这意思

收起

跳线,从盘,主盘或者单一盘,自动设置跳线位,从硬盘控制器上主盘,限制磁盘使用2.1G(4092个簇)
附术语解释,希望对你有用:
硬盘跳线分三种设置:master(主盘)、slave(从盘)、cable select(根据在数据线上的位置决定主从)。
cable select (简称CS)=====电缆选择 当硬盘的跳线设置成“Cable Select”时,硬盘的主从关系...

全部展开

跳线,从盘,主盘或者单一盘,自动设置跳线位,从硬盘控制器上主盘,限制磁盘使用2.1G(4092个簇)
附术语解释,希望对你有用:
硬盘跳线分三种设置:master(主盘)、slave(从盘)、cable select(根据在数据线上的位置决定主从)。
cable select (简称CS)=====电缆选择 当硬盘的跳线设置成“Cable Select”时,硬盘的主从关系将由其连接到数据线上的位置而决定。
Limits drive capacity to 32 Gbytes======限制磁盘使用32G
Limit capacity of 32GB =====限制容量为32GB
Master or Single drive =====表示设置硬盘为主盘或该通道上只单独连接一个硬盘,即该硬盘独占一个IDE通道,这个通道上不能有从盘。
Master with a non-ATA compatible slave======表示存在一个主盘,而从盘是不与ATA接口硬盘兼容的硬盘,这包括老式的不支持DMA33的硬盘或SCSI接口硬盘
master w/slave present======表示当前盘为主盘,同时存在从盘
cs Enabled ======CS Enabled为自动设置跳线位。
无跳线======表示当前硬盘为从盘
cap limit=====这个跳线是 针对老主板的 有的主板不支持 大容量硬盘 有的甚至不可以超过20G的硬盘 所以这个跳线是让主板开机的时候只识别C盘

收起

跳线, 从盘, 主盘或者是单独盘(?这个东西没见过。。。), 允许选择线路, 主盘和不支持ATA的从盘,磁盘容量限制为2.1GB(4092个簇)
这个不是连着的句子吧。。。 莫名其妙的。。